| | Title |
 |
The 3 top pictures were published in MOTOJORNAL of 26 juin 1990. The legend says that they are sketches of the successive phases of Pan-European project. Concepts and design were defined by Honda (Mario Carneiro) |
 |
-- (Mario Carneiro) |
 |
-- (Mario Carneiro) |
 |
-- (Mario Carneiro) |
 |
Rest of the photos is from the ST1100 ST1100 Engine/gearbox unit disassembled (Mario Carneiro) |
 |
Sectioned view of ST1100 motor r/h side (Mario Carneiro) |
 |
Crankshaft main journal bearing (Mario Carneiro) |
 |
Crankshaft showing crankpin for cylinders 1 & 2 (Mario Carneiro) |
 |
Piston crowns (Mario Carneiro) |
 |
View down cylinder bores (Mario Carneiro) |
 |
Crankshaft/connecting rod/piston assembly (Mario Carneiro) |
 |
Valves/springs/cam followers/shims (Mario Carneiro) |
 |
Inlet valve/exhaust valve (Mario Carneiro) |
 |
View of combustion chamber (valves removed) (Mario Carneiro) |
 |
Cam shafts (Mario Carneiro) |
 |
Exhaust system & view of rusted muffler end caps (Mario Carneiro) |
 |
Camshaft timing gear and belt assembly (Mario Carneiro) |
 |
Gearbox - mainshaft, countershaft and gearshift selector drum. Front, centre and rear shift forks, shift fork shaft and gearshift spindle assembly. (Mario Carneiro) |
 |
Clutch assembly (Mario Carneiro) |
 |
Gearbox mainshaft and countershaft (Mario Carneiro) |
 |
Clutch disc and two clutch plates. (Mario Carneiro) |
 |
Gearshift pawl and ?shift fork (Mario Carneiro) |
 |
Gearbox cassette/transmission unit (Mario Carneiro) |
 |
View final gearcase assembly, driveshaft and universal joint (Mario Carneiro) |
 |
Fuel tank (Mario Carneiro) |
 |
Front and rear wheels (Mario Carneiro) |
 |
Steering head (Mario Carneiro) |
 |
Close up view front brake disc. (Mario Carneiro) |
 |
Transmission (Mario Carneiro) |
 |
Camshaft journal bearing (front) (Mario Carneiro) |
 |
Right and Left fork leg assemblies. (Mario Carneiro) |